Steren AUD-764 Manual De Instrucciones página 5

7. In order to activate the ambient noise reduction, place the power
switch to the ON position. The system will be activated and noise will
be reduced.
8. If you wish to mute the audio signal, slide the MUTE switch to the
right. In order to return to normal mode, slide the switch to the left.
9. Once you have finished using your headphones, deactivate the
noise elimination system by setting the power switch to the OFF
position.
These headphones can function normally even if the ambient noise
elimination system is deactivated, but ambient noise will be heard.
When you eill not be using your headphones, fold them and store
them in their case.
Impedance:
Sensitivity:
Frequency Response:
Noise Reduction Frequency Range: 70-1000 HZ (+/- 12 dB at 300 Hz)
Input:
Power:
Weight:
Dimensions:
Product design and specifications are subject to change without
previous notice.
SPECIFICATIONS
32 ohms +/- 10%
100 dB +/- 3 dB @ 1 KHz
20 Hz – 20 KHz
1,5V - - - 1 x AAA (not included)
100 mV
180 gr.
1,9m
ENGLISH-05