If using the air tubing,
a) Attach one end of the air tube
to the rubber stem.
b) Carefully attach the opposite
end of the air tube to the
stem at the base of the
Nebulizer, Fig. 9.
Make sure that the mouthpiece or
other attachments are properly
connected to the
nebulizer cover.
Operating Your
Nebulizer
NOTE: The Nebulizer that is provided with your
kit is operable at up to a 45
1) Attach the angled
mouthpiece or optional mask to the top of
the Nebulizer, Fig. 10.
If using the optional tee adapter set,
a) Attach the tee adapter to
the top of the Nebulizer,
b) Connect one end of the
tee adapter to the straight
straight mouthpiece and
the other to the extension
tube.
NOTE: The tee adapter is not needed when
using a mask.
2) Check that the POWER switch
has been pressed to "off."
Plug the power cord into a
main outlet.
3) Press the POWER switch to
the "on" position.
4) Start your treatment
according to your physician's
or therapist's instructions.
5) Once the treatment is
complete, press the POWER
switch to "off" and unplug the
power cord from the outlet.
Remember:
• Keep your eyes away from the output of
medication mist.
• If any discomfort or abnormality occurs, stop
using the unit immediately.
• Do not tilt or shake the unit when in
operation.
Fig. 9
°
angle.
Fig. 10
To end a treatment,
1) When the treatment has ended, press the
POWER button.
2) Unplug the adapter from the outlet and
detach the adapter plug from the unit's
AC port.
3) Dispose excess medication and water before
disconnecting the battery.
4) Allow the unit to cool — approximately
20-30 minutes.
Remember:
• The unit should not be used for more than
30 minutes at a time.
• Wait 30 minutes before reusing the unit.
After Every Use
1) Unplug the unit from the power source.
2) Allow the unit to completely cool.
3) Carefully remove the Nebulizer and pour
out any remaining medication.
4) Follow the cleaning procedures provided in
this guidebook.
Replacement Parts
Replacement parts are available through your
local retailer or they can be ordered by mail.
See separate replacement part list for details.
6