Assembling The Trap - Biogents BG-Mosquitaire Manual De Instrucciones

Contents
1. Suction funnel with shutter
2. Funnel net
3. Catch bag (2x)
Preassembled body
4. Gauze covering
5. Top part of lid
6. Bottom part of lid
7. Trap body
8. Inner tube with ventilator
9. 12 V outdoor power supply (US version with 39 in cable)
10. DC extension cable (33 ft)
11. Mosquito attractant BG-Sweetscent™
(to be ordered separately)

Assembling the Trap

1. Open the BG-Sweetscent package and remove the BG-
Sweetscent pouch [F1]. Place the BG-Sweetscent into
the black slot located on the inside wall of the inner
tube [F2].
2. Place the funnel net (2) around the bottom of the suc-
tion funnel (1) [F3]. Then place the catch bag (3) over
the funnel net (2) above and tighten the catch bag [F4].
3. Insert the suction funnel with the attached funnel net
and catch bag [F4] into the opening on top of the lid [F5].
4. Plug the outdoor power transformer (9) into a water safe
outlet [F6]. Use the extension cord to set the trap at di-
stances up to 33 ft from the power transformer. When
the power is turned on, the shutter will automatically tilt
open.
5 4 8
BG-Sweetscent
BG-Sweetscent
F1
(1)
(2)
(3)
F3
F5a
1
2
3
6
7
9
10
11
F2
F5b
F4
F6
EN 3