User Manual
EN
FireWare Hybrid
Only use gas propane or butane as fuel for the fire extinguishing trainer.
Place the gas cylinder at a distance of at least 4 meters from the fire extinguishing trainer.
Make sure gas cylinders always stand firmly upright and cannot fall over.
If a gas cylinder is exchanged, always close the valve on the gas cylinder.
NEVER cover the gas outlet opening at the top of the fire extinguishing trainer completely.
This may cause irreparable damage.
NEVER connect the fire extinguishing trainer directly on the gas cylinder, always position
the operating handle in-between.
Take note of the date printed on the gas hose. This date is the maximum use by date; the
hose must be replaced before this date is reached.
Make sure that the appliance and the hoses can be placed in a safe location so that no one
can slip, trip or fall over it. Tape the hoses to the floor if necessary.
Check the fire extinguishing trainer, gas cylinder and gas hose for damage before every
use. Do not use the fire extinguishing trainer if you have any doubts about its usability.
Always keep the device upright during use.
14
FireWare Hybrid
www.FireWare.nl