DESCRIPTION OF DEVICE
1.1 Jack plug
1.2 Battery lid
WARNING
Read these instructions carefully before you start using the
device .
Intended use
The device is intended to be plugged into a mobile phone and to stream
the sound from the mobile phone directly to the hearing aids.
Note: The device uses a standard jack plug which is common in newer
mobile phones. If your mobile phone uses a different configuration, it may
not work with this product.
THE BATTERY
Your device uses a type 10 battery. We recommend zinc-air batteries.
To obtain replacement batteries, please consult your hearing care profes-
sional. It is important to take note of the expiry date and the recommen-
dations on the battery pack regarding disposal of used batteries.
Inserting the battery
• Before inserting a new battery into the device, remove the adhesive
tab. Once the tab has been removed, the battery will start functioning
after a few seconds.
• Use the nail grip to gently open the battery lid as illustrated.
• Place the battery in the compartment so that the small plus (+) sign on
the battery is upwards.
• Close the battery lid. If it does not close easily, the battery is incorrectly
inserted.
NOTE: If you use the phone for conversations for more than 3 hours a day,
we recommend changing the battery once a week.
If you use it less than 3 hours a day, we recommend changing the battery
once every second week.
- see illustration 2
3
– See illustration 1