HOW TO USE
How to charge your Bluetooth speaker?
Before using the product, charge the battery cube about 6 to 8 hours.
* Remove the safety cap for descrubir the load input.
* Connect the cable as shown in the figure below.
* The tip of the other end requires an adapter that allows charging from the
power jack or a USB port.
* When you are charging, the charging indicator light will glow red.
* When it is fully charged the light will turn green.
* Cover with safety plug after charging is completed.
* Do not charge more than 8 hours.
After charging the battery, it is ready to be used.
* Keep the external adapter out of the reach of children.
* Disconnect the external power adapter when not in use.
* Never attempt to open the speaker, it could cause damage to the product.
To turn on the product hold the button on / off button for 2 seconds (on the bot-
tom side of the product is the button) or use the "On" button on the remote control.
To turn off the product repeat the above operation until you hear a sound and not see
the lights.
This speaker designed for outdoor use, can be used as furniture.
It has a storage function (if the batteries are not dead) so that when the ON / OFF
button is pressed, the lighting will maintain the same schedule before shutting down If
the battery is exhausted, the memory will not work.