Steren BAF-1587 Manual De Instrucciones página 30

INSTRUCTIONS
Make all initial connections with the power switches OFF on all devices. Make sure
volume levels are all the way down, you can adjust them later.
1. Connect the power cord to the speaker and turn into an
outlet.
3. Use the RCA line in input jacks in order to connect a CD,
MP3, DVD, mixer or other type of audio device.
To avoid damages in the BAF-1587, BAF-1587BT and
to obtain a good sound quality you should adjust the volume
of your amplified audio source (ipod, MP3, DVD, etc.)
between 50% to 70% level.
2. Connect a microphone to the input jack labeled MIC IN through
the 6.3 mm plug or Cannon plug.
4. Power all the devices on. A LED indicator light will illuminate
indicating that the speaker is powered on.
ON
11 11