ASROCK Z370 Killer SLI/ac Manual De Instrucciones página 29

Serial ATA3 Connectors
(SATA_0_1:
see p.1 or 2, No. 10)
(SATA_2_3:
see p.1 or 2, No. 9)
(SATA_4_5:
see p.1 or 2, No. 8)
USB 2.0 Headers
(9-pin USB_1_2
(see p.1 or 2, No. 15)
(9-pin USB_3_4)
(see p.1 or 2, No. 16)
USB 3.1 Gen1 Header
(19-pin USB3_5_6)
(see p.1 or 2, No. 6)
Front Panel Type C USB
3.1 Gen1 Header
(26-pin USB3_TC_2)
(see p.1 or 2, No. 7)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
Z370 Killer SLI/ac / Z370 Killer SLI
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA_5 will be disabled.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA_0 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There is one header on
this motherboard. Each
USB 3.1 Gen1 header can
support two ports.
There is one Front
Panel Type C USB 3.1
Gen1 Header on this
motherboard. This header
is used for connecting a
USB 3.1 Gen1 module for
additional USB 3.1 Gen1
ports.
25