ASROCK Z370 Killer SLI/ac Manual De Instrucciones página 31

CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1 or 2, No. 4)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1 or 2, No. 5)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1 or 2, No. 1)
Thunderbolt AIC
Connector
(5-pin TB2)
(see p.1 or 2, No. 21)
Serial Port Header
(9-pin COM1)
(see p.1 or 2, No. 23)
This motherboard pro-
FAN_SPEED_CONTROL
CPU_FAN_SPEED
vides a 4-Pin CPU fan
FAN_VOLTAGE
GND (Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
1 2 3 4
connect it to Pin 1-3.
This motherboard pro-
12 24
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
1 13
13.
This motherboard pro-
8 5
vides a 8-pin ATX 12V
power connector. To use a
4 1
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
Please connect a Thunderbolt™
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
* Please install the Thunderbolt™
AIC card to PCIE4 (default
slot).
This COM1 header
RRXD1
DDTR#1
supports a serial port
DDSR#1
CCTS#1
module.
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
Z370 Killer SLI/ac / Z370 Killer SLI
27