ASROCK Z490 Taichi Manual De Instrucciones página 29

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 20)
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 14)
(SATA3_2_3:
see p.1, No. 15)
(SATA3_4_5:
see p.1, No. 16)
(SATA3_A1_A2:
see p.1, No. 17)
USB 2.0 Headers
(9-pin USB_1_2)
(see p.1, No. 26)
(9-pin USB_3_4)
(see p.1, No. 25)
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
the chassis speaker to this
+5V
header.
1
PLED+
PLED+
PLED-
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* M2_2, SATA3_0 and
SATA3_1 share lanes. If
either one of them is in
use, the others will be
disabled.
* M2_3, SATA3_4 and
SATA3_5 share lanes. If
either one of them is in
use, the others will be
disabled.
* M2_3, SATA3_4,
SATA3_5 and USB32_
TC_1 share lanes. If
either one of them is in
use, USB32_TC_1 will
downgrade to 16 Gb/s
max.
*To minimize the boot
time, use Intel® Z490
SATA ports (SATA3_0)
for your SSDs.
There are two headers
USB_PWR
P-
on this motherboard.
P+
GND
DUMMY
Each USB 2.0 header can
support two ports.
1
GND
P+
P-
USB_PWR
Z490 Taichi
25