ASROCK Z490 Taichi Manual De Instrucciones página 49

2.12 M.2_SSD (NGFF) Module Installation Guide (M2_3)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_3) supports type 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module
and M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
* M2_3, SATA3_4 and SATA3_5 share lanes. If either one of them is in use, the others will
be disabled.
* Enter the BIOS Setup and go to Advanced\USB Configuration to disable "Third Party
USB 3.2 Controller"; otherwise, M2_3 will support M.2 PCI Express module up to Gen3 x2
(16 Gb/s) by default.
Installing the M.2_SSD (NGFF) Module
E D C
No.
Nut Location
PCB Length
Module Type Type2230
5
4
3
2
1
B A
1 2
A B
3cm 4.2cm
Type 2242
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
3 4
C D
6cm 8cm
Type2260 Type 2280
Z490 Taichi
5
E
11cm
Type 22110
45