Antibrachial Table Walkers Rp755T - Rp756T; Before Use; Warnings For Use; How To Use - Mopedia RP755S Manual De Instrucciones

8

8.3 Antibrachial table walkers RP755T - RP756T

1. Start assembling your walker with the pole of the back frame which has to be inserted in
the tubes of the lateral frame and fixed with two brass buttons.
RP757

9. BEFORE USE

WARNING!
• Always check the good condition of the product.
• Pay attention on the presence of electrical cables in way, wet surfaces, rugs,
toys or debris, furniture, little steps and gaps in floors. Do not use the walker on stairs
or escalators.
• USE EXTRA CAUTION ON WET AND SLIPPERY SURFACES.
• Avoid to leave the walker in contact with water for long periods and control its
sturdiness periodically.
• Keep it away from children to avoid any possible risks.

10. WARNINGS FOR USE

This device provides greater stability, support and safety while moving. In any case, it cannot be
used by people with a functionality of the hand and / or arm visibly weak and even by people with
balance problems. The walker can be used both outside and inside. We recommend using only
on surfaces on which all four legs touch the ground. It should not be used on rocky terrain or on
inclined surfaces because the walker can become unstable. The device is not designed for the
transport of persons or other material.
• Use extra caution on wet and slippery surfaces.
• Do not use with patient who exceed the weight indicated in the product label and in the
technical features chapter of the present manual.
• Avoid to leave the device in contact with water for long periods of time.
• Periodically check its sturdiness, the stability and the rubber tips are in good conditions.
Replace them once worn out.
• In case of doubts about use, adjustment or maintenance, contact your dealer.
• Keep it away from children to avoid any possible risks.

11. HOW TO USE

The walker is a personal product, so you may want to adjust the height of the walker by specialized
personnel.
Note: Refer to the safety instructions in this manual. Use the walker as aid device for walking. To do
this use the two handles and push forward the aid thus obtaining a support convenient and reliable
for walking.
2. *Foldable – Simply , open the frame. RP756T
*Demountable - Use the two horizontal poles to install in the
back frame to strengthen the whole walker. Fix the poles with
the four screw-buttons. RP755T
3. To assembly the padded armrest, insert the poles (ref.C) into the
support tubes, once they are at the same height block them
with the levers on the walker.
4. Place the padded table (ref.A) and adjust the height, in order
the user can rest his arms forming a 90° angle.
5. Adjust the handles at the desired opening and block them
with the screw-buttons supplied with the padded table.
6. Assure that the screws are duly tighten.
7. The padded table is now correctly assembled and ready to use.
8. The seat can be easily assembled or removed thanks to the
hooks on the poles of the lateral frame. *(RP757 optional)