Philips Norelco 2000 Serie Manual De Instrucciones página 10

10
English
S1311 only
Charging with the power cord
2
1
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
When you charge the shaver for the first time
or after a long period of disuse, let it charge
until the charging light lights up continuously.
Charging takes approx. as follows: 10 hours
(S1111 only), 8 hours (S1211 only) or 1 hour (S1311
only). A fully charged shaver has a shaving
time of up to: 30 minutes (S1111 only), 40
minutes (S1211 only) or 45 minutes (S1311 only).
Note: Before first usage charge the appliance
for 3 hours without interruptions and until the
battery charging indication shows that the
battery is full. This is needed to make
maximum use of the battery capacity. All
future charges will take 1 hour.
1 Make sure the product is switched off.
2 Put the small plug in the product and
connect the power plug into any 100V to
240V AC outlet.
- Use only the power cord provided.
- The charging light on the product will
indicate the charging status.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.