Factory Reset - Sonoff ZBBridge Manual Del Usuario

SONOFF TECHNOLOGIES CO., LTD.

Factory Reset

Long press the pairing button for about 5s until the Wi-Fi LED
indicator changes in a cycle of two short and one long flash and
release, then the reset is successful. The device enters quick
pairing mode (Touch).
Please reset the switch to factory defaults if you want to change the
Wi-Fi network, then reconnect the new network.
Compatible Pairing Mode (AP)
If you fail to enter Quick Pairing Mode (Touch), please try
"Compatible Pairing Mode (AP)" to pair.
Long press configuration button for 5s until the Wi-Fi LED
1
indicator changes in a cycle of two short flashes and one long
flash and release. Long press configuration button for 5s again
until the Wi-Fi LED indicator flashes quickly. Then, the device
enters Compatible Pairing Mode (AP).
2 Tap "+" and select "Compatible Pairing Mode (AP)" on APP
For Android system:
patient until pairing completes.
For iOS system:
the password 12345678, and then go back to eWeLink APP and
tap "Next". Be patient until pairing completes.
Enter Wi-Fi password and tap "Next". Be
Select Wi-Fi SSID with ITEAD-****** and enter
7
English