COLUMBIA VAC KC500 Manual De Instrucciones página 12

Front
1. Control panel
2. Display
3. vertical blinds
4. horizontal blinds
5. Casing
6. Water-level gauge
7. Wheels
TECHNiCAL DATA
- Power output: 65W
- Power-supply voltage: 220-240v ~ 50hz
- Tank capacity: 7l
- Air-flow rate: 270 m
- Capacity assumed for the room: 20m
- battery (remote control): CR2025
iNTENDED USE
The device is designed to improve thermal comfort in living spaces.
using the fan, hot ambient air is forced through the cartridges, which are constantly moistened with
water, so absorbing the heat in the natural evaporation process. This allows refreshing cool air to flow
out from the air conditioner. Cooling efficiency can be increased by fitting frozen cartridges, filled
with water, in the water tank.
CONTROL PANEL, REMOTE CONTROL
A switch device on/off
B switch cooling function on/off
C select fan speed
D switch the vertical blinds oscillation on/off
E switch the automatic device shut-down on/off
F select a stored programme
ASSEMBLY
unpack the device and assemble the individual components before first use.
Pull the tank (11) out of the device body and remove all components.
slide the tank back into place. Then turn the device upside down, place it on a soft surface (e.g. on a
carpet) and install the wheels - Fig. 3
flip the device into the correct position. Check that the filter is installed in the device (see the "FiLTER"
section).
•
12 EN
OPERATiNG iNSTRUCTiON
/h
3
2
PORTAbLE AIR COOLER KC500
Back
8. handle
9. filter
10. filter cover
11. Tank
12. Lock
Additional accessories
13. Cooling cartridges - 2 pcs.
14. Remote control
EN