Internal Cleaning Of Hood And Hose; Spare Parts; Recycling - Nederman 532 Serie Manual Del Usuario

EN NEX S
6.2.4

Internal cleaning of hood and hose

1.
Detach hood and hose.
2.
Carry out dry or wet cleaning according to instructions above.
3.
Let the components dry.
4.
Re-fit the components.
5.
Ground the hose spiral. See figure 6. Take a control meter reading. See
figure 8.
6.3

Spare parts

CAUTION!
Use only Nederman original spare parts and accessories.
Contact your nearest authorized distributor or Nederman for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
•
Part number and control number (see the product identification plate).
•
Detail number and name of the spare part (see www.nederman.com).
•
Quantity of the parts required.
6.4

Recycling

The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.
16
Risk of equipment damage.