Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP AND ADJUSTMENT
1. Drive your vehicle into garage and park in the desired location.
2. Activate the parking assist by obstructing the path of the safety
reversing sensors. The laser will emit a pulsing bright red beam
(Figure 4). Aim the red beam to a location on the dash or hood
that can easily be seen while seated in the driver's seat.
NOTE: The laser will automatically deactivate after approximately
one minute for Chamberlain garage door openers. If the laser shuts
off after one minute, and you are not finished adjusting the beam,
simply obstruct the path of the safety reversing sensors and the
beam will turn back on. For all other installations utilizing the
120 Vac power adapter, the parking assist beam will continuously
pulse.
3. Sit in the driver's seat and confirm that you can easily see the
location of the red beam. This location is now your point of
reference for parking your vehicle. CAUTION: Do not stare
directly into the beam. Repeat steps for installation on optional
2nd laser accessory kit.
OPERATION
1. Open the garage door by activating the garage door opener and
drive your vehicle into parking space.
2. The red beam can be seen moving across the hood of your
vehicle as you drive further into the garage (Figure 4).
3. Stop the vehicle when the beam is positioned at the location you
confirmed in step 3 during SET UP AND ADJUSTMENT.
NOTE: The laser will automatically deactivate after approximately 1
minute for Chamberlain garage door openers. For all other
installations utilizing the 120 Vac power adapter, the parking assist
beam will be continuously pulsed on.
TROUBLESHOOTING
If the laser does not emit a beam:
• For installations with a Chamberlain garage door opener, verify
that the safety reversing sensors are aligned and nothing is
obstructing them.
• Verify nothing is blocking the parking assist lens.
• Verify that connections are not reversed.
• Verify that all connections are secure.
• Confirm that the parking assist is aimed toward the garage floor.
• Obstruct the path of the safety reversing sensors and look for the
red spot on the garage floor.
Please refer to your owner's manual for additional information on
your garage door opener and the safety reversing sensors.
For Service Dial Our Toll Free Number:
U.S.: 1-800-528-9131
Canada: 1-800-654-4736
www.chamberlain-diy.com
114A3425
Figure 4
© 2007, The Chamberlain Group Inc.
All Rights Reserved
Parking Assist
Publicidad
