VWR 89094-746 Manual Del Usuario página 3

Model 89094-756, 620-1885--Test point of 37.00°C. Supplied with dual standard probes with cables.
Designed for use in air and liquids, the sensor and cable may be completely immersed.
Model 89094-758, 620-1886--Test points of 0.00°C, 25.00°C and 37.00°C. Supplied with dual
standard probes with cables. Designed for use in air and liquids, the sensor and cable may be
completely immersed.
SETTING THE TIME-OF-DAY/DATE
Slide the DISPLAY switch to the DATE TIME position, the display will show the time-of-day and date.
While in the time-of-day/date display, pressing the SELECT button will allow the date and time to be set.
Pressing the SELECT button will cause the digits to flash in the following order
Year→Month→Day→Hours→Minutes →12/24 hour time→No digits flashing (value set). Once the
desired item is flashing, pressing the ADVANCE button will increment the value.
While in the time-of-day/date display, pressing the EVENT DATE TIME button will switch the date
display between Month/Day (M/D) and Day/Month (D/M).
With the desired time-of-day/date appearing on the display, press the SELECT button until no digits are
flashing on the display. The time-of-day/date will be saved.
Note: While in the setting mode, if no button is pressed for fifteen (15) seconds, the unit automatically
exits from the setting mode.
VIEWING THE TIME-OF-DAY/DATE
To view the time-of-day/date, slide the DISPLAY switch to the DATE TIME position.
DISPLAYING °F OR °C
To display the temperature readings in Fahrenheit or Celsius, slide the °C/°F button to the desired
position.
DISPLAYING PROBE 1 OR PROBE 2
Slide the PROBE switch to the desired position (1 or 2) to display the desired temperature sensor
readings.
VWR Collection Manual ver 1, rel 1 25.04.2017