Denver BTH-150 Manual Del Usuario página 4

Switch On: Press and hold the MFB about 3 seconds. There will be a warning tone and the blue light is
on. The headset enters Bluetooth paring mode automatically, and the blue & red indicator light starts to
flash alternately and quickly.
Switch Off: Press and hold the MFB about 3 seconds.
Calls: Quick Press MFB to answer a call; Press and Hold MFB to reject or end a call; Quick press MFB
twice to redial previous number;
Change the song: Short press +/- button.
Adjust the volume: Long press +/- button. When the max volume is reached the headphones will
indicate with a beep tone.
Pairing:
1. Ensure that your phone or Bluetooth device is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the headset. The
headset enters the pairing mode, and the blue & red indicator light starts to flash alternately and quickly.
To pair the headset if it has been previously paired with another device, ensure that the previously paired
devise is switched off.
3. Activate the Bluetooth feature on your phone or Bluetooth devices, and set it to search for Bluetooth
devices.
4. Select "Denver BTH-150" from the list of found devices on your phone or Bluetooth devices.
5. When successfully connected, the blue light turns to continuously lighting.
Note: The headset that has been previously paired with another device will automatically connect with
the device if the device is power on and within connecting range, if not, the headset will enter standby
mode with blue light.
Charge the Battery:
Plug the Micro USB cable into the USB charging socket of headphone and plug the other end into a USB
port on your computer or other devices made for USB charging. The indicator light will be red while
charging. Once fully charged, the indicator light will be Blue.
Low Battery Warning:
When battery voltage is lower than 3.2V under power on condition, there will be a warning beep every 15
seconds.
Power-Off under Low Battery Condition:
When battery voltage is lower than 3.0V under power on condition, the headset will switch off
automatically.
Application:
Denver BTH-150 can make and receive calls hands-free with your compatible mobile phone and listen to
music from a compatible Bluetooth device, but they should be within 15 meters (49 feet) without barrier
The headset is compliant with the Bluetooth Specification 5.0 and supports the following profiles:
Headset Profile (HSP) , Hands-free Profile (HFP) , Advanced Audio Distribution Profile (A2DP) , and
Audio Video Remote Control Profile (AVRCP)
04