Quick Start - Alesis V61 MKII Guia Del Usuario

User Guide (English)
Introduction
Box Contents
V61 MKII
User Guide
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit alesis.com.
For additional product support, visit alesis.com/support.

Quick Start

Device Setup in Software
To select V61 MKII as a controller for your digital audio workstation (DAW):
1. Connect V61 MKII to your computer using a standard USB cable. (If you are connecting V61 MKII to a
USB hub, make sure it is a powered hub.)
2. Open your DAW.
3. Open your DAW's Preferences, Options, or Device Setup, select V61 MKII as your hardware
controller, and then close that window.
Your V61 MKII is now able to communicate with your software.
V61 MKII Editor Installation
We recommend visiting
intuitive way to edit the various MIDI messages that V61 MKII's controls send to your computer.
Setup
You can power the keyboard via a powered USB port. The V61 MKIIs are low-power devices. It is
recommended that you connect the V61 MKII to an onboard USB port or to a powered USB hub.
Items not listed in Introduction > Box Contents
USB Cable
Safety & Warranty Manual
alesis.com and downloading the V61 MKII Editor, which gives you a visual and
Software Download Card
are sold separately.
Computer
Sustain Pedal
3