Chapter -5: Troubleshooting - Sharp SJ-F1560EVI-EU Manual De Uso

CHAPTER -5: TROUBLESHOOTING

Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels or if a problem occurs with
the appliance. Warning codes are displayed in the freezer and cooler indicators.
ERROR TYPE
"Failure" Warning
and audible
warning
Freezer compartment is
not cold enough
Refrigerator
compartment is not cold
enough
Refrigerator
compartment too cold
"Low voltage" Warning
If you are experiencing a problem with your refrigerator, please check the following before contacting the after-sales
service.
Your refrigerator does not operate
Check if:
• Your fridge is plugged in and switched on
• The fuse has blown
• Is the temperature adjustment right?
• The socket is faulty. To check this, plug another working appliance into the same socket.
Your refrigerator is performing poorly
Check if:
• The appliance is overloaded
• The doors are closed properly
• There is any dust on the condenser
• There is an adequate distance between the appliance and surrounding walls
If your fridge is operating too loudly;
To maintain the set cooling level, the compressor may be activated from time to time. Noises from your fridge at this
MEANING
There is/are some
part(s) out of order or
there is a failure in the
cooling process.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time. Ideal temperature
for the refrigerator
compartment is +4
If you see this warning,
your foods are at risk of
spoiling.
The food will start to
freeze because the
temperature is too cold.
This is seen when the
power supply becomes
lower than 170 V.
WHY
Call a service agent for assistance as
soon as possible.
1. Use food within a short time period.
Do not freeze foods that has thawed.
2. Set the freezer temperature to colder
values or set the Super Freeze until
the compartment gets to normal
temperature.
3. Do not put fresh food in the appliance
until the fault has cleared.
1. Set the refrigerator temperature
to colder values or set the Super
Cooling mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
C. until the fault clears.
o
1. Check if the Super Cooling mode is
switched on.
2. Decrease the refrigerator temperature
values.
This not a failure. This prevents any
damage to the compressor. This warning
will clear after the voltage reaches the
required level.
EN -20-
WHAT TO DO