Shoulder Immobiliser/Abduction
Description
This support immobilises the shoulder after rotator cuff repair,
shoulder girdle fracture, dislocation/subluxation or multidirectional
instability. Made from a soft velour material for comfort and has easy
use features such as a quick release buckle, de-rotational shoulder
strap and an exercise ball to facilitate hand function and stimulates
circulation.
This support is manufactured from high quality materials and we
recommend that a medical professional fits the support for you. If at any time you experience discomfort or your
condition worsens, remove the support immediately and consult your therapist/medical professional. For size
measure the length of the forearm.
Fitting Instructions
A) Detach shoulder strap and open front panel. Position elbow in the sling as far back as possible.
Loop the sling strap through the D-ring and secure.
B) Secure strap at the top of the sling. If the thumb strap is desired, attach strap at the front of the sling.
C) Place shoulder strap over the opposite shoulder. Connect shoulder strap to the sling using the quick
release buckle.
D) Place pillow at the waistline of the affected
side. Attach the sling to the outside of the
pillow, along the hook and loop strips.
Buckle the waist strap to the pillow and
adjust the strap to fit. Position the arm
for desired internal or external rotation by
sliding the pillow forward or back along
the waistline.
Cleaning and Care
Hand wash in warm water with liquid mild
soap and leave to dry naturally.
DO NOT MACHINE WASH OR
TUMBLE DRY.
NEVER OVER TIGHTEN STRAPS.
This support should feel comfortable at
all times.
REMOVE BEFORE GOING TO SLEEP .
Code
Size
09 136 9131
Small
09 136 9123
Medium
09 136 9115
Large
Cm
25-28
28-30
30-33