ASROCK E35LM1 R2.0 Manual Del Usuario página 18

Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your
power supply along with Pin 1 and Pin 13.
Serial port Header
(9-pin COM1)
(see p.2 No. 22)
Chassis Intrusion Header
(2-pin CI1)
(see p.2 No. 14)
2.7 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.8 Installing Windows
TM
Vista 64-bit / XP / XP 64-bit Without RAID Functions
If you want to install Windows
/ XP 64-bit OS on your SATA3 HDDs without RAID functions, please follow below
procedures according to the OS you install.
18
20-Pin ATX Power Supply Installation
1
GND
Signal
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
ASRock E35LM1 R2.0 Motherboard
12
1
This COM1 header supports a
serial port module.
This motherboard supports
CASE OPEN detection feature
that detects if the chassis cover
has been removed. This feature
requires a chassis with chassis
intrusion detection design.
TM
/
TM TM
/ Vista 64-bit / XP
24
13