Using the wireless charger
3
When the mobile device or the Galaxy Watch is fully charged, remove the mobile device
or the Galaxy Watch from the wireless charger.
Precautions for the mobile device or the Galaxy Watch charging
• D o not place the mobile device on the wireless charger with a credit card or radio-
frequency identification (RFID) card (such as a transportation card or a key card)
placed between the back of the mobile device and the mobile device cover.
• D o not place the mobile device or the Galaxy Watch on the wireless charger when
conductive materials, such as metal objects and magnets, are placed between the
mobile device or the Galaxy Watch and the wireless charger.
The mobile device or the Galaxy Watch may not charge properly or may overheat, or
the mobile device, the Galaxy Watch, or the cards may be damaged.
• Y ou may need to purchase a charger separately depending on the wireless charger
you bought.
• D epending on the location of the wireless charging coil of the mobile device or the
Galaxy Watch, your mobile device or your Galaxy Watch may not charge properly.
• W ireless charging may not work properly if you have attached a thick case to your
mobile device. If your case is thick, remove it before placing your mobile device on
the wireless charger.
• I f you connect a charger to the mobile device during wireless charging, the
wireless charging feature will be unavailable.
• I f you use the wireless charger in areas with weak network signals, you may lose
network reception.
• T he fan inside the wireless charger may produce noise during fast wireless
charging. When you deactivate the fast wireless charging feature, the fan noise will
be reduced. To see how to deactivate the fast wireless charging feature, refer to the
mobile device's user manual.
• I f you place a Galaxy Watch with both connecting bands together on the wireless
charging surface, the Galaxy Watch may not charge because the charging coil is
not coming into contact with the wireless charging coil of the Galaxy Watch.
• T he Gear S2 does not support the wireless charging feature.
• T o save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
English (USA)
7
5