Twin-Star International 33WM684 Manual De Instrucciones página 4

N
Completed
Mantel
E-4
Mantel/Top
G
N
M
L
Completed
Assembly
Electric
Fireplace Insert
10. Locate Mantel/Top (G) and lay fin-
ished side up on top of the complet-
ed assembly. Make sure that top seats
onto Wood Dowels (N). From the
inside attach the Mantel using Bolts
(L) and Washers (M), through the
pre-drilled holes in the mounting
blocks. HAND TIGHTEN ONLY.
N
11. Using Philips head screwdriver
tighten all bolts alternating top and
bottom, left and right. Please read all
M
Electric Fireplace Insert Instructions
L
prior to installing Electric Insert in
your completed Fireplace Mantel.
Install the insert in your fireplace
close to its final position. Move your
completed unit only short distances.
Move completed unit with great care.
It takes two people to move complet-
ed unit into its position.
12. Remove the two mounting brackets
attached to the back of the Left Front
Panel (B) and Right Front Panel (C).
Set aside with the wood screws.
13. Lift insert carefully into the back if
the unit and center in the insert
opening. Do not drag insert across
Base/Hearth as it may scratch your
unit.
14. Install the mounting brackets to
hold insert flush against the inside of
the mantel.
Twin-Star International, Inc.
Delray Beach, FL 33483
In USA: 866-661-1218
In Canada: 866-374-9203
Model# 33WM684
Made in China
Printed in China
revised 04/05
© 2004, Twin-Star International, Inc.