Promise Technology FASTTRAK TX4660 Guia De Inicio Rapido página 14

FastTrak TX4660, TX8660, TX8668 Quick Start Guide
5. Choose the RAID Level you want. In the Define LD Menu section, press the
Spacebar to toggle through logical drive types:
• RAID 0 (Stripe)
• RAID 1 (Mirror)
• RAID 5 (Distributed Parity)
• RAID 10 (Stripe/Mirror)
• JBOD (Single Drive)
• SPAN (Concatenated Drives)
6. Press the arrow keys to move to the next option. Option choices depend on
the RAID Level you selected.
• Fast Init – Erases the Master Boot Record (MBR) of the physical drives
when this feature is set to ON. ON is recommended.
• Gigabyte Boundary – Enables replacement of a failed disk drive with a
slightly smaller drive. ON is recommended. Applies to RAID but not to
JBOD or SPAN.
• Stripe Block Size – Set to 16 KB with no options. Applies to RAID but
not to JBOD or SPAN.
7. Press the arrow keys to move to Disk Assignments. Press the spacebar to
toggle between N and Y for each available drive. Y means this physical drive
will be assigned to the logical drive.
Assign the appropriate number of physical drives to your logical drive.
8. Press Ctrl-Y to save your logical drive configuration.
14