goliath R-AC009 Manual Del Usuario

EN
GOLIATH R-AC009
USER'S MANUAL
LOWER DOCKING BLOCK FOR G2 STANDS
WHAT YOU WILL FIND IN THE BOX:
1 Assembled lower coupling block including:
2 Allen Screws M5
1 Allen screw M8
1 Closing handle
DESCRIPTION AND TECHNICAL CHARACTERISTICS:
The R-AC009 lower docking was designed primarily to work in conjunction with the
R-AC008 upper coupling on the rear of the G2 line stands (manual stands).
Its purpose is to house tools for wheel work such as the chain wrench to extract sprocket cassettes
(included in the R-AC002 set), the planetary bead breaker R-AC004 (Photo 4) or the wheel
centering arch (R-AC005 ).
This coupling requires to have mounted the upper coupling R-AC008 (Photo 3) where the wheels
to be worked are housed using the axles included in the R-AC002 set.
This coupling is exclusively compatible with the following stands:
- GOLIATH EVOLUTION (G2-EVO)
- GOLIATH RACE (G2-RACE)
- GOLIATH MANUAL (G2)
ASSEMBLY AND USE INSTRUCTIONS:
* Before assembling this coupling, it is convenient to mount the upper coupling R-AC008 on the
head of the G2 stand used. (Photo 3)
1- Remove the 2 Allen M5 screws and the Allen M8 screw from the coupling, thus separating the
two parts that compose it.
2- Join both halves on the tube of the G2 support foot as shown in photo 1, in such a way that the
handle is facing downwards.
3- Secure the coupling by tightening the 2 included M5 Allen screws. (Photo 2)
4- Insert the M8 Allen screw and tighten as necessary to secure the coupling. (Photo 2)
5- Extend the support tube with the R-AC008 upper coupling already assembled in such a way that
both couplings are at an approximate distance of 40cm between the centers of each one. (Photo 3)
6- In case of having to adjust the position of the lower coupling R-AC009, loosen the 3 Allen screws
included, reposition it and re- x said screws by rst tightening the two M5 Allen screws and then
the M8 Allen screw.
7- Once positioned, the couplings are ready to house the wheel work tools and proceed to the
desired task.
1
DANGER WARNINGS IN USE:
1- This accessory must not be operated by children.
2- Secure the coupling well by tightening the Allen screws to avoid an accidental fall.
MAINTENANCE:
This accessory does not require any speci c maintenance, however the coupling adjustment knob
can be lubricated with oil for greater smoothness.
WWW.GOLIATH-BIKE.COM
2
3
4