Samsung SEK-2000 Manual De Instrucciones página 5

7. Plug the TV's power cable to an outlet.
8. Turn on the TV.
9. Please wait for the Evolution Kit to be recognised (up to 10 seconds).
10. Once recognised, the Evolution Kit will update the TV to the 2014 version. Wait for the update process to finish.
- The TV will turn off and on automatically after completing the software update.
- The LAN cable adapter and Samsung Smart Control unit can only be used after installing the Evolution Kit on the TV.
Detaching the Evolution Kit
Grab the Evolution Kit's edges and pull out the Evolution Kit with the right
side pushed to detach it from the TV, as illustrated by the figure side.
1
Recovering a Previous State
1. Turn off the TV and then disconnect the TV power plug.
2. Detach the Evolution Kit from the TV.
3. Turn on the TV, navigate to Software Update ( Support > Software Update ), and then update the software.
- Update the software via the Internet. Otherwise, you will not be able to update via USB or play DRM-protected videos.
Correcting if Improperly Attached
Push one of the corners in the direction of arrow ① and press
the PUSH button indicated by arrow ②.
2
English-5
2
1