Operating your refrigerator
CHECKING THE CONTROL
PANEL
Each time you press the button, a short
beep will sound.
USING THE CONTROL PANEL
( 1 )
Fridge
Press the Fridge button to set the desired
temperature from the range between 1 °C
and 7 °C.
Default set temperature is set on 3 °C
and each time you press the button,
temperature will change in following order
and temperature indicator will display the
desired temperature.
When the temperature setting is done,
temperature indicator will display the
current temperature of the refrigerator.
If current temperature is higher than 9 °C,
temperature indicator will be displayed as
9 °C.
DA68-03008E-04.indb 17
( 2 )
Power Cool
Press the Power Cool button to activate
the Power Cool function.
Power Cool indicator will light up and
the refrigerator will speed up the time to
needed to cool products in the refrigerator.
Power Cool function will operate for
2 hours and 30 minutes to quickly cool the
refrigerator.
To deactivate the Power Cool function,
press the Power Cool button again.
( 1 )
Power Cool function cannot be used
( 2 )
together with Vacation function.
( 3 )
Selecting Vacation function will
automatically deactivate the Power Cool
( 4 )
function.
( 3 )
Door Alarm
1. Alarm
Press the Door Alarm button to activate
the Alarm function.
Alarm indicator will light up and the
refrigerator will alert you with alarm sound
if the refrigerator door is kept open for
longer than 2 minutes.
To deactivate the Alarm function, press the
Door Alarm button again.
2. Display Off
As standard, the temperature display is
switched off, to switch between on and
off mode, press Door Alarm button for 3
seconds.
English - 17
2016. 3. 24.
3:54