Product Overview - Hach FP 360 sc Manual Básico Del Usuario

Product overview

D A N G E R
This product is not suitable for use in potentially explosive
atmospheres.
WA R N I N G
The UV rays from the flash bulb are harmful to eyes and skin.
Do not look directly through the measurement window during
operation under any circumstances. Remove the measurement
sensor from operation before carrying out any maintenance or
installation work.
The FP 360 sc sensor is a UV fluorimeter used to continuously measure
the concentration of PAH (polycyclic aromatic hydrocarbons) in water.
The measurement values can be converted to reflect the total oil content
for mineral oils using lab data.
The sensor may need to be installed with additional accessories
depending on its area of application.
Area of application
Open channels, shafts, tanks
Chain mount kit
(solid matter max. 200 mg/L)
Measurement media without
solid matter with continuous, Flow cell
low sample throughput
Do not apply the sensor to any hard mechanical effects.
Installation with Sensor variants
Sensor with or without
cleaning unit
Sensor without
cleaning unit
Product components
The sensor is available in a variety of types.
Refer to Figure 2 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
Figure 2 FP 360 sc sensor
FP 360 sc measurement sensor
1
Basic user manual with CD
2
Measurement window
3
Sensor with cleaning unit
4
(depending on model)
6 mm fitting for cleaning unit
5
(depending on model)
Safety sleeve
6
Connector cable
7
Shackle
8
English 7