Setup - Stryker 1488 Manual Del Usuario

Setup

1. Set up the 1488 HD console according to the instructions provided in
Stryker user manual P18966 or P18972.
2. Connect the Pendulum Camera to the console.
• Unscrew the soaking cap from the cable connector if necessary.
• Align the blue arrow on the cable connector with the blue arrow
on the camera-connector port on the front console panel.
• Push in the connector until it locks in place.
• (To unplug the Pendulum Camera from the console, grasp the
knobbed portion of the connector and pull straight out.)
3. Attach an endoscope to the Pendulum Camera.
• Remove the red dust cap if it is present.
• Lock the endobody brake by pushing it to the left.
• Twist the endobody clamp and hold it open.
EN-7