3 - USE OF THE APPLIANCE
3.1 - CONTROL PANEL
T1
T2
MIN
REPLACE
T3
T1.
ON/OFF key
T2.
"Speed" key
T3.
"Ion/UV" key - "Child Lock" key
T4.
"Timer" key
T5.
"Auto" key
T6.
"Sleep" key
D1.
"Auto" mode LED
D2. Speed LED (Min, Med, High, Max)
3.2 - APPLIANCE PREPARATION
a.
Remove the appliance from the packaging and make sure it is intact.
b. Select a stable, levelled and plane location where to place the appliance.
Make sure there is enough free space around the appliance to ensure correct air flow.
Respect the distances and spaces described in the paragraph "0.3 - General warn-
ings".
c. Remove the front panel (1) by pulling it towards yourself, the panel is closed thanks to two magnets.
If the front panel (1) is opened or removed, the appliance immediately stops op-
eration. When the front panel (1) is positioned correctly, the appliance resumes
normal operation.
d. Remove the filters from its respective bags before use.
e. Correctly position the filters (2 and 3) in the appliance.
f.
Position the front panel (1) on the appliance body (6) by inserting the lower hooks (1a) in the specific
seats (6b) first, then push it forward to close it by means of the two magnets (fig.C).
D1
D2
AUTO
MED
HIGH
MAX
LOCK
FILTER
D5
D6
D3
(µg/m
)
PM2.5
3
UV
WIFI
TIMER
ION
D7
D8
D3.
Visualization of detected quantity of impurities
D4.
Air quality LED
D5. "Filter to be replaced" warning LED
D6.
"Child Lock (Children safety)" function
LED
D7.
"Ions/UV" mode LED
D8.
"Timer" function LED
D9.
"Wifi" function LED
D4
T4
DIRTY
CLEAN
D9
T6
>>>>>
EN - 9
AURA ABSOLUTE
T5