Replacement; A - Replacement Of Hepa Filter (2B) And Active Carbon Filter (3); A - Uv Lamp Replacement; Storage - Olimpia splendid AURA ABSOLUTE Insinstrucciones Para El Uso Y Manutencion

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4.3 - REPLACEMENT

4.3.a - Replacement of HEPA filter (2b) and active carbon filter (3) (fig.H)
After approximately 4320 hours of operation, the "Filter to be replaced" warning LED (D5) switches on
(red), indicating that the filters MUST be replaced.
Do not use the appliance without filters or if they are damaged.
Do not use the appliance beyond the 4320 h of operation without changing
the filters.
a. Remove the front panel (1) by pushing it towards yourself.
b. Remove the pre-filter (2a) by unhooking it from the respective hooks (x).
c. Remove the HEPA filter (2b) by pulling the tab (3a).
d. Remove the active carbon filter (3) by pulling the tab (3a).
e. Replace the filters (2b) and (3) with two new ones.
f. Reposition the three filters in reverse order and make sure they are correctly inserted in the corre-
sponding seats.
g. Reposition the front panel (1) on the appliance body (6) by inserting the lower hooks (1a) in their
specific seats (6b) first, then push it forward to close it by means of the two magnets.
After replacing the filter, press the RESET button (11a); the appliance resets its usage time (4320
h) (Fig.L).

4.3.a - UV lamp replacement

DO NOT stare directly at the UV lamp (10) when it's switched on.
In case of replacement of the UV lamp (10), please refer to the Assistance
Service.

5 - STORAGE

• In case you have no intention of using the appliance for a long period of time, clean it as indicated in the
previous paragraphs.
• Position the appliance in its original packaging and store it in a dry and fresh environment, far from direct
exposition to sunlight.
Do not store the appliance in moist or particularly dirty environments.
EN - 13
AURA ABSOLUTE

Publicidad

Tabla de contenido
loading

Tabla de contenido