Do not use the appliance without filters (2 and 3)
g. Use the specific handle (8) in order to move the appliance.
h.
Insert the plug in the power socket, the appliance is ready for use.
Before electrically connecting the appliance, make sure the plate data correspond
to those of the electricity distribution network.
3.3 - USE
Each time the keys are pressed, the appliance emits a "beep".
3.3.a - ON/OFF key
By pressing the ON/OFF key (T1), the appliance switches on, emits three beeps and the display lights up
the LED (D3) detecting the quantity of impurities in the air (reference values "PM 2.5") and the LED (D4).
To switch off the appliance, press the key ON/OFF (T1) again.
3.3.b - Fan speed
By pressing the "Speed" key (T2) it is possible to select the fan speed:
Min. (low) -- > Med. (medium) -- > High. (high) -- > Max. (turbo) -- > Min. (low) -- > ...
When the "Auto" key (T5) is pressed to select the "auto" mode which adjusts the fan speed based on
air quality, the LED (D1) switches on.
To deactivate the "Auto" mode, press the key "Auto" (T5) or the key "Speed" (T2).
If "AUTO" is active, the fan speed cannot be changed.
3.3.c - Ions/UV mode
By pressing the "ION/UV" key (T3) Ions mode is activated and the UV lamp (10) switches on simultane-
ously; the LED (D7) switches on.
Press the key "ION/UV" again (T3) to deactivate the function; the LED (D7) switches off.
3.3.d - Child Lock function (Children safety)
Child Lock
Press the key "
the LED (D6) switches on. In this condition, all buttons are locked.
Child Lock
Press the "
EN - 10
" (T3) for approximately 5 seconds to activate the "children safety" function;
" key (T3) again for approximately 5 seconds to deactivate the function.