CHARGING YOUR BRAVEN
• Before using your BRAVEN for the first
time, charge the unit until all 5 Battery
Indicator Lights are solid (not flashing),
indicating a full charge (typically 4 to 6
hours).
• To charge your BRAVEN, plug in the wall
power adapter. Plug the connector end of
the cable into the BRAVEN charging port.
3
CHARGING EXTERNAL DEVICES
Your BRAVEN 1100 or BRV-HD speaker is designed
to charge USB devices that draw from 0.3A - 2A using
the full sized USB port, including most tablets and
cell phones. The BRAVEN 805 speaker will charge at
speeds of up to 1A. To use external charging:
1.
Turn your BRAVEN on.
2.
Plug the USB power cable that came with your
phone, mp3 player, or other mobile device into
the USB port on your BRAVEN.
3.
Plug the other end of the cable into your mobile
device, and it will immediately begin charging.
Full manual and troubleshooting: braven.com/manuals
SPEAKERPHONE
Press the Play button on your BRAVEN to answer
the call over the speaker. Press the Play button again
to end the call.
DTS AUDIO
BRAVEN 8 Series speakers include a proprietary,
bass-enhancing technology from DTS Audio called
SRS WOW HD. To activate SRS WOW HD, press the
volume up and volume down buttons simultaneously
for two seconds while music is playing on the
speaker. Press the volume up and down buttons
again for two seconds to turn off SRS WOW.
WATER-RESISTANT FEATURE
(BRV-HD ONLY)
• The BRV-HD is IPX3 water-resistant.
BRV-HD speakers are not intended to be
submerged in water, but are resistant to light
rainfall and light water splashing.
• IMPORTANT: To ensure your BRV-HD
speaker is prepared for use in a wet
environment, remove all cable connections
and tightly close the side water cap. If the
water cap is not properly closed, the BRV-
HD will not be water resistant.
4