Energy Saving Tips; Maintenance Of Freezer - Telstar TCH425120MD Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.5 ENERGY SAVING TIPS

The appliance should be located in the coolest area of the room, away from heat producing appliances or
out the direct sunlight.
Let hot foods cool temperature before placing in the appliance. Overloading the appliance forces the
compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe dry placing them in the appliance. This cuts down on frost build-up
inside the appliance
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper Liners interfere with cold air
circulation, making the appliance less efficient. oweling.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.

MAINTENANCE OF FREEZER

3.1 CLEANING
Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling effect and energy
saving. The interior of the freezer should be cleaned regularly to avoid odor. Soft towels or sponge dipped in
water and non-corrosive neutral detergents are suggested for cleaning. The freezer of shall be finally cleaned
with clean water and dry cloth. Open the door for natural drying before the power is turned on.
• Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes,
organic solvents (such as alcohol, acetone, banana oil. etc.). Boiling water, acid or
alkaline items clean freezer considering that this may damage the fridge surface and
interior
• Do not rinse with water so as not to affect the electrical insulation properties. Please use
a dry cloth when cleaning temperature control knob and electrical components.
23
HORIZONTAL FREZZER
TCH425120MD

Publicidad

Tabla de contenido
loading

Tabla de contenido