Telstar TCH425120MD Manual De Instrucciones página 27

4. Lean the cabinet on the bottom
cushion. (Do not keep this situation
for a long time).
7. Remove the screw with
screwdriver
10.
Make cabinet stand. (Keep the
freezer satnding up for more than 6h,
then connect the power supply).
5. Fix the casters by screwdriver.
8. Reuse the screw that removed from
the previuos step, ans fix the caster with
the fitting screws in the carton box.
11. Fix the handle on the door with
screws
27
HORIZONTAL FREZZER
TCH425120MD
6. Casters are installed
9. After completed installation.
12. Put two ends of handel into the
slot, then push the middle of the cover
to complete the assembly