Taurus Alpatec VILNA 600 Manual Del Usuario página 16

not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains when
it is not in use, even if it is only for a short while,
as proximity to water involves a risk, even if the
appliance is disconnected.
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not store or transport the appliance if it is still
hot.
- Do not expose the appliance to extreme tempe-
ratures.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance connected and
unattended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance to dry textiles of any kind.
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
appliance's cleaning is not done according to
these instructions.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Installation
rial such as textiles, cardboard or paper, etc.
- Install the appliance a minimum distance of
50cm away from combustible materials, such as
curtains, furniture ...
- Ensure that neither the air access nor exit beco
me either totally or partially covered by drapery,
- In the event that the appliance is mounted on a
bathroom wall, position it in such a way that the
socket, power supply cable, switches or other
controls are not within the reach a person in the
bath, shower or at the wash-hand basin.
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 30 cm
between walls or other obstacles and 30cm from
- Do not cover or obstruct any of the openings of
the appliance.
- Do not cover or obstruct the sides of the
appliance, leave a minimum space of 2cm around
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
ce it should be situated in a place where the atmos-
pheric temperature is between 12 and 32ºC.
appliance and so as to be able to install the
low a window. But never obstructing or covering a
ventilation area.
- The appliance should work well with its wall
support attached or with its base/feet attached.
can be supported.
can be supported.
- Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
- Drill into the wall where marked and insert the
-Take 1 Long bracket on the back housing, align
screws for 1 long bracket.
-Before Insert the expansion bolts to the wall,
please make sure the distance between bolts as
below table :
Model
Vilna 600
Vilna 900
Vilna 1200
-
Vilna 1500
Vilna 2000
- Insert the bolts onto the wall
- Fix the short bracket in right position
-Hang the heater to the bracket
-Fix the last hole on long bracket after hanging on
the wall
- Place the support by matching the holes with
should be able to support twice the weight of the
appliance.
-
-
Distance
139mm
226mm
313mm
400mm
574mm
12