Taurus Alpatec VILNA 600 Manual Del Usuario página 17

- Fit the appliance into the wall support.
- To assemble the base feet, place the appliance
face down.
- Stand the appliance up again so as to check
that the base feet work properly.
Instructions for use
- Make sure that all the product's packaging has
been removed.
- Prepare the appliance according to the function
you wish to use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off main
switch.
- When the heater is switched on, the clock will
pop out on the display for setting.
tically enter standby mode as defaulted.
-Press stand-by mode button to make the heater
start working.
device into Comfort mode.
In case of power failure, after reconnecting the
power supply, the unit will be in standby mode.
Pressing the standby button
THE TIME TO BE CURRENT TIME and the unit
will be worked as the mode and temperature
before power failure.
Press M button continuously to select among the
3 modes: Economic mode
and Comfort mode
Comfort mode (Setting the desired tempera-
which is equal to the comfort temperature lowe-
red by 3.5° C. This mode reduces the tempera-
ture without disturbing the desired comfort mode
Press
Press
ture between 5ºC to 30ºC.
Press
ture sensor can automatically test the tempera-
ture. When the room temperature is higher than
the selected temperature, the heater will stop
heating.
The purpose of Clock & Day of Week Setting is to
set the current time and day of week.
Clock& Day setting is only related to Mode Pro-
This setting will also be regarded as the last time
the machine started operation.
-
The 'day of week' setting and 'time period' setting
will be based on this setting.
Press
select among hour/minute/day of week setting.
Press
to turn the
of week
JUST RE-SET
Antifreeze mode
Selection
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Hour
Minute
Eco mode (ECO Maintains temperature
(the device maintains the
button to display the set temperature.
button to select the desired tempera-
button. Continue to press
buttons to set the hour/minute/ day
1 2 3 4 5 6
5
-
button to
7
1
2
3
4
5
6
7
00-23
01-59
13