Vaporesso XIRON Manual Del Usuario página 5

(3) Start Vaping: press and hold the power button to start
vaping. For your safety, please do not vape for more than 5
seconds at a time.
(4) Adjust the Power: press the "+" button or "-" button to
adjust the power.
(5) Flip the Screen: press the power button and "+" button
simultaneously to flip the screen 180°.
(6) System Setting: press the "+" button and "-" button
simultaneously to enter the system setting interface, which
includes STAMRT VW, VW, VV, DEFAULT and EXIT.
VV: select "VV" and press the power button to enter VV mode.
VW: select "VW" and press the power button to enter VW
mode.
SMART VW: select "SMART VW" and press the power button to
enter ON/OFF setting.
DEFAULT: select "DEFAULT", "YES" and press the power button
to restore the factory setting.
5. Charge the Battery
Connect the device and the standard charger via Type-C cable.
PROTECTIONS
(1) Overtime Protection: the device will stop working if you
vape for more than 5 seconds at a time, and "OVER TIME" will
show on the screen.
(2) Low Resistance Protection: when an extremely low
resistance is detected, the device will stop working and show
"LOW ATOMIZER" on the screen.
English
3