Charging The Battery Pack - Toro Flex-Force Power System Manual Del Usuario

Operation

Charging the Battery Pack

Important:
Charge the battery pack only in temperatures that are
within the appropriate range; refer to
Note:
At any time, press the battery-charge-indicator button on the
battery pack to display the current charge (LED indicators).
1. Ensure that the vents on the battery are clear of any dust and debris.
1. Battery pack cavity
2. Battery pack venting areas
3. Battery pack terminals
2. Line up the cavity in the battery pack
the charger.
3. Slide the charger into the battery pack until it is fully seated
4. To remove the battery pack, slide the charger backward out of the
battery pack.
Specifications (page
Figure 2
4. Battery-charge-indicator button
5. LED indicators (current charge)
6. Handle
(Figure
8
7).
2) with the tongue on
(Figure
g347460
2).