Clutch Adjustment - Cleco MP2476 Manual Del Usuario

PL15-2476-LG1
09/22/2017

Clutch Adjustment:

1. Remove the clutch housing from the
tool.
2. Insert the hex key wrench into the
end of the cam spindle to hold the
spindle in position while turning the
adjusting nut.
3. Turn the adjusting nut clockwise to
increase torque or counterclockwise
to decrease torque.
Each spindle thread, one complete
turn (360°) of the nut, equals:
7.00 in. lbs. (Hard Slam)
4.25 in. lbs. (Soft Pull)
EN
MP2476: Reference 54
MP2477: Reference 55
MP2478: Reference 57
MP2476: Reference 7
MP2477: Reference 43
MP2478: Reference 49
Page 18
MP2476: Reference 5
MP2477: Reference 49
MP2478: Reference 51
MP2476: Reference 14
MP2477: Reference 47
MP2478: Reference 43