Connection Description; About Bluetooth Pairing - Tenveo VA3000 Manual Del Usuario

4.Connection Description

DIN6 cable to camera
DIN6 cable to microphone
Video conference system can be connected to computer and other system via USB cable.
Connection steps:
1. Connect the camera and hub with the original DIN6 data cable.
2.Connect the speakerphone and hub with the original DIN6 data cable.
3.Connect the Hub with the original power adapter .
4. Connect the Hub to computer .
5. Confirm the connection was confirmed correctly, and turn on the power switch on Hub. Open a conference software ,
then the speakerphone and Camera will complete self-checking .Select the corresponding Camera (FHD Camera), microphone
and speaker driver to start the audio and video conference with the device.
Settings for PC and video devices in USB call mode:
1.Please adjust the volume of speakers and microphones comprehensively to ensure the communication is clear and
smooth.
2.Don' t turn on automatic gain of the speaker and microphone.
3.Give priority to turning off the audio processing functions of the computer software/video software (such as automatic
gain, echo cancellation, noise reduction etc.).
Please use higher quality speech coding as far as possible.

5.About Bluetooth Pairing

1. Press " " button," Y" Bluetooth indicator flashes. It means the speakerphone enters the Bluetooth pairing mode.
2. Place the mobile device in Bluetooth search mode and choose our bluetooth device.After the Bluetooth connected , the
indicator will be blue. then you can use the speakerphone for audio calls now. Note: If it can't pair, please restart Bluetooth and
try again .
USB to PC
Power Supply 12V DC (AC power adaptor)
3