General Features - Ardetem TMP Manual Del Usuario

SUMMARY
1. INTRODUCTION
2. TECHNICAL FEATURES
3. EXTERNAL FEATURES
4. CONNECTIONS
5. CONFIGURATION INPUT / OUTPUT
A. Current input configuration
B. Voltage input configuration
C. Output configuration
1.INTRODUCTION
The TMP is an analogue measure converter for DC magnitudes; it will con-
vert any IDC or UDC signal into a normalised 0-20 mA, 4-20 mA (active or pas-
sive) or 0-10 V signal.
The input and output calibres can be modified by straps,
accessible behind the front face according to your applications.
Any modification of the input or output straps leads to a down scale and full
scale adjustement.
The device also offers ;
• galvanic partition Input / Output / Power supply : 2 KV
• a broad supply span
• a response time between 10 ms and 30s. (optional)

General features

• Reduced case volume
p2
• Plug-off connectors for screwed connections
• Operating temperature : -10°C to +60°C.
p3
• Storage temperature : -30°C to +80°C.
p4 • CE Marking
• Disturbance immunity according to standards IEC 61000-6-2
p4
(IEC 61000-4-3 : level 3, IEC 61000-4-4 : level 4, IEC 61000-4-6 : level 3)
p5
p5
The device is dedicated to the industrial environment. They can be found
p6
in various applications :
• PLC input interface.
p6
• Data centralising on API.
• Acquisition, regulation, registering, watching of signals.
• Retransmission of voltages and intensities on panels and low voltage
switchboxes.
• Watching of engine intensities and voltages.
p1 p2