Bluetooth Pairing; Presetting Stations - RCA RS3965SB Manual Del Usuario

Radio
Press SOURCE or TUNER on the remote control to
select TUNER.
Selecting tuner band
Press AUTO PROG / BAND on the unit or TUNER on
the remote control to select between AM and FM
radio bands.
Tuning to a station
Press / to select frequencies. Press and
hold to start auto searching for the next available
station.

Presetting stations

Manually setting presets
1. Press / to access the desired frequency.
2. Press PROG button. The most recently accessed
program location will be displayed.
3. If a different program location is preferred,
press / to select the desired preset
number (1-32).
4. Press PROG to store the selected frequency at
that preset.
Auto preset programming (FM only)
Press and hold AUTO PROG / BAND for 2 seconds to
scan stations in the FM band. The stations will then
be stored as preset channels. A maximum of 32
stations can be stored.
Beware of your preset channels being erased
accidentally because the scanning and storing
process is automatic upon pressing and holding
the button for 2 seconds.
You can stop the automatic scan by pressing TUN+/
TUN - button, but the erased stations cannot be
recovered.
Using presets
Press PRESET to access the previous or next
preset station. The display first shows the preset
program number and after a few seconds, the
frequency will be displayed. (e.g. P 01 is preset 1)
Suppressing stereo signal
Press FM ST. to select between ST ON and ST OFF
for stereo FM stations.

Bluetooth Pairing

Before Bluetooth pairing, you should turn on the
Bluetooth function of your other device (such as,
mobile phone with Bluetooth function) and select
RS3965SB.
1. Press SOURCE repeatedly on the unit or press
the on the remote control to select BT
(Bluetooth) mode.
2. The Bluetooth indicator blinks at slow speed
a n d i t a u t o s e a rc h e s fo r t h e l a s t p a i re d
Bluetooth device in memory.
3. Once it enters the pairing status, the Bluetooth
indicator will blinks at high speed.
4. Press PAIRING for 3 seconds to start pairing.
• If the Bluetooth pairing is successful, the
Bluetooth indicator will illuminate.
• If the Bluetooth pairing is not fixed, the
Bluetooth indicator will blink at slow speed.
Please try pairing again.
Note: If your Bluetooth device (such as, mobile
phone) needs the password while pairing, please
enter 4-digit number: 0000.
Enjoy the music through Bluetooth
• Press to begin or pause playback.
• Press / to select a specifi c track.
• P r e s s a n d h o l d
backward/forward at high speed.
LINE IN/AUX IN
Play external sound through the speaker
system
Press SOURCE on the unit repeatedly to select LINE IN
or AUX mode.
Or press LINE IN/AUX on the remote control to
change to LINE IN/AUX mode from CD, TUNER or BT
mode; press LINE IN again to change to AUX mode.
Suggest using Ø3.5mm LINE IN jack
for mp3 player and AUX IN jacks for
auxiliary equipment such as DVD,
VCR or PC.
- 10 -
/ t o s t a r t m o v i n g
EN