Publicidad
Idiomas disponibles
Idiomas disponibles
(1)Colour filter trame
(2)Clip-to-hold clamps
(3)Tube
(4)Mounting-bracket
(5)Extension spring
(6)Housing cover
(7)Mounting bracket screws
? Adjust the desired inclination-angle via the mounting-bracket and fix the fixation screws.
Connection with the mains
? DANGER TO LIFE! The electric connection must only be carried out by a qualified electrician!
? In order to connect the device to the mains, you have to install a n appropriate transformer
with a 12 V at least 60 W output (per PAR 16 spot)
OPERATION:
?
After toy connected the device to the mains, you can control the device via your lighting controller
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert
after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a skilled
person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not be
corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension, trussing).
3) The electric power supply cables must not show any damages
? DANGER TO LIFE! Disconnect from mains before starting maintenance operation!
? There are no serviceable parts inside the device except for the lamp. Maintenance and service operations are
only to be carried out by authorized dealers.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption,
Dimensions (L x W x H);
Weight:
Fitting lamp
Maximum ambient temperature T
Maximum housing temperature T
Minimum distance:
? The device should be installed outside areas where persons
may walk by or be seated.
? IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE
EXPERIENCE, including (but not limited to) calculation working
load limits, installation material being used, and periodic safety
inspection of all installation material and the projector.
? The device has to be installed out of the reach of people.
? Before rigging make sure that the installation area can hold a
minimum point load of 10 times the device? s weight.
? DANGER OF FIRE! When installing the device, make sure
there is no highly inflammable material (decoration articles, etc.)
within a distance of min. 0.5 M.
? For overhead use, always install a safety-rope that can hold at
least 10 times the weight of the fixture.
a
B
Este símbolo en su equipo o embalaje, indica que el presente producto
no puede ser tratado como residuos domésticos normales, sino que deben
entregarse en el correspondiente punto de recogida de equipos electrónicos
y eléctricos. Asegurándose de que este producto es desechado
correctamente, Ud. está ayudando a prevenir las consecuencias negativas
para el medio ambiente y la salud humana que podrían derivarse de la
incorrecta manipulación de este producto. EL reciclaje de materiales
ayuda a conservar las reservas naturales. Para recibir más información,
sobre el reciclaje de este producto, contacte con su ayuntamiento, su
punto de recogida más cercano o el distribuidor donde adquirió el producto.
Max.230-240V/AC, 50Hz
Max.50W
92x92x120mm
0.2 kg
Max12V/50W GX-5.3
: 45°C
: 160°C
0.5m
Publicidad
