Samsung RS25H50 Serie Manual Del Usuario página 22

MAKING MINOR ADJUSTMENTS
TO THE DOORS
A level refrigerator is necessary for getting the
doors perfectly even.
Make sure your refrigerator is level before you
begin.
If you need help leveling, review the previous
section on leveling the refrigerator.
When the door of the freezer is higher than
Adjustment part
The process for adjusting each door is the same.
Open the doors and adjust them, one at a time, as
follows:
1. Unscrew the nut ( 1 ) from the lower hinge until
it reaches the upper end of the bolt ( 2 ).
When you release the nut ( 1 ), make sure
that you use the hex wrench provided
( 3 ) to loosen the bolt ( 2 ) in a counter-
clockwise (
You should then be able to unscrew the
nut ( 1 ) with your fingers.
DA68-02981F (EN)-150612.indd 22
the fridge
(3) Wrench
(2) Bolt
(1) Nut
) direction.
English - 22
2. Adjust the height difference between the doors
by turning the bolt ( 2 ) clockwise (
counter clockwise (
When you turn clockwise (
door will move up.
3. After adjusting the doors, turn the nut ( 1 )
clockwise ( ) until it reaches the lower
end of the bolt, then tighten the bolt again with
the wrench ( 3 ) to fix the nut in place ( 1 ).
If you do not secure the nut firmly, the bolt
may release.
) or
).
(3) Wrench
(2) Bolt
), the
(3) Wrench
(2) Bolt
(1) Nut
2015. 6. 12. 11:20