These warning symbols are
here to prevent injury to you
and others.
Please follow them carefully.
After reading this section,
keep it in a safe place for
future reference.
CRITICAL
WARNING
INSTALLATION
WARNINGS
• Do not install the
refrigerator in a damp
location or place where
it may come in contact
with water.
- Deteriorated insulation on
electrical parts may cause an
electric shock or fire.
• Do not place this refrigerator
in direct sunlight or expose
it to the heat from stoves,
room heaters, or other
appliances.
• Do not plug several
appliances into the same
multiple power strip.
The refrigerator should
always be plugged into its
own individual electrical
outlet which has a voltage
DA68-02981F (EN)-150612.indd 4
rating that matches the
voltage listed on the
refrigerator's rating plate.
- This provides the best
performance and also
prevents overloading of
house wiring circuits, which
could cause a fire hazard
from overheated wires.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock of fire.
• Do not use a power cord
that has cracks or abrasion
damage along its length or at
either end.
• Do not bend the power cord
excessively or place heavy
objects on it.
• Do not twist or tie the power
cord.
• Do not hook the power cord
over a metal object, place a
heavy object on the power
cord, insert the power cord
between objects, or push the
power cord into the space
behind the appliance.
• When moving the refrigerator,
be careful not to roll over or
damage the power cord.
- This may result in an electric
English - 4
2015. 6. 12.
11:20