Motion Occurrence; Loss Occurrence - Samsung SMO-150TRN Guia Del Usuario

2) Press ENTER (in the middle of the Rotary Wheel) to replay the event
in Event Replay mode. Up to 16 screens can be replayed centering on
the time of the Alarm. The duration of Replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the
stored screens one by one.
Press ENTER to terminate the Event Replay. The Event Replay will
continue until ENTER has been pressed.
04/01/01
CH4
CH7
3) Alarm occurrence information is stored in the "EVENT LIST".
4) Alarm Out (HOT, COLD) signals are active during the "ALARM
HOLD TIME. "
• ALARM HOLD TIME : Time during which the Alarm function
is carried on after the Alarm is first detected. Alarm Hold Time
is reset automatically when Event Replay is turned on.
5) Recording output continues in Normal mode until the Alarm is
cleared. The recording frequency of the corresponding channel
increases.
6) Signals change as the Alarm occurs and later clears.
VCR Trigger
Recording
Time Lapse Mode
Output
Alarm Output
Alarm Reset Output
Alarm/Motion Occurrence

2. Motion Occurrence

The Motion option only becomes available when a camera with
Motion features is connected.
1) When a Motion trigger is received, a warning buzzer sounds and
the screen is divided into 9 Live-Mode sub-screens. The word
"EVENT "appears on the screen and the Motion occurrence infor-
mation is displayed at the bottom right of the screen.
04/01/01
CH1
CH4
CH7
12:30:30
EVENT
1
CH2 CH3
CH5 CH6
ALARM
04/01/01
CH8
12:29:30
Trigger ignored
Normal Mode Time Lapse Mode
Alarm Reset
12:30:30
EVENT
CH2 CH3
CH5 CH6
CH8 M12345678
2) Press ENTER (in the middle of the Rotary Wheel) to replay the event
in Event Replay mode. Up to 16 screens can be replayed centering on
the time of the Motion occurrence.
The duration of the replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the
stored screens one by one.
Press ENTER to terminate the Event Replay. The Event Replay will
continue until ENTER has been pressed.
3) Motion occurrence information is stored in the "EVENT LIST".
4) Alarm Out (HOT, COLD) signals are active during "ALARM
HOLD TIME".
5) Recording output continues in Normal mode until the Motion is
cleared. The recording frequency of the corresponding channel
increases.
6) Signal output continues as the Motion occurs and later clears.

3. Loss Occurrence

1) When the Loss occurs, a warning buzzer sounds and the screen is
divided into 9 Live-Mode sub-screens. The word "EVENT" and
Loss channel appears on the screen and the corresponding channel
appears Blue Black.
When more than one Loss occurs, that channel number display
switches to Blue-Black with a 1 second interval.
150ms or Above
2) Press ENTER (in the middle of the Rotary Wheel) to replay the event
in the Event Replay mode. Up to 16 screens can be replayed centering
on the time before the Loss occurrence. The duration of the Replay is
displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the
stored screens one by one.
Press ENTER to terminate the Event Replay. The Event Replay will
continue until ENTER has been pressed.
Eng-15
04/01/01 12:30:30
EVENT
1
CH2 CH3
CH4 CH5 CH6
MOTION
04/01/01
CH7 CH8
12:29:30
04/01/01 12:30:30 L12345678
EVENT
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8
04/01/01 12:30:30 L12345678
EVENT
1
CH2 CH3
CH4 CH5 CH6
LOSS
04/01/01
CH7 CH8
12:30:00