REMIS REMIfront IV-D Instrucciones De Retroadaptación página 3

A. Information about installation
Step 1: (Check scope of delivery)
B1
Step 2: (Installing frieze band)
B2
B3
B4
B5
B1:
1x Assembly instructions
1x Frieze band black L=60mm
1x Frieze band black L=80mm
B2-B5:
The adhesion takes place on both sides of the girder (see
B3), the frieze band has to be turned over when gluing.
Frieze band „short" (60mm) is mounted at the measure-
ment 30mm, Frieze band „long" (80mm) is mounted at the
measurement 220mm (see B4+B5).
Note: The surface must be completely clean, dry,
dust and grease free!
US/GB
3/8